Post Offer Free
Ohmalloy Material Co.,Ltd  

Gold Index: 5061

You are here: home  > 0.230 mm Precision Alloys Invar Alloy Strip 8.2 g/cm3 Density 6.0mm ~ 250mm Width
  • 0.230 mm Precision Alloys Invar Alloy Strip 8.2 g/cm3 Density 6.0mm ~ 250mm Width
  • 0.230 mm Precision Alloys Invar Alloy Strip 8.2 g/cm3 Density 6.0mm ~ 250mm Width
Enlarge 0.230 mm Precision Alloys Invar Alloy Strip 8.2 g/cm3 Density 6.0mm ~ 250mm Width

0.230 mm Precision Alloys Invar Alloy Strip 8.2 g/cm3 Density 6.0mm ~ 250mm Width 

Place of Origin: Zhejiang, China (Mainland) 
inquire
Add to My Favorites
HiSupplier Escrow
Share |

Product Detail

Model No.: 4J29 / Invar

0.2×30 mm Precision Alloys Invar Alloy Strip 8.2 g/cm3 Density 6.0mm ~ 250mm Width
<u

0.2×30 mm Precision Alloys Invar Alloy Strip 8.2 g/cm3 Density 6.0mm ~ 250mm Width

 

Sealing glass elements of Vacuum switch tube

 

OhmAlloy-4J29 (Expansion alloy)
(Common Name: Kovar, Nilo K, KV-1, Dilver Po, Vacon 12)

 

Kovar is a nickel–cobalt ferrous alloy compositionally identical to Fernico, designed to be compatible with the thermal expansion characteristics of borosilicate glass (~5 × 10−6 /K between 30 and 200 °C, to ~10 × 10−6 /K at 800 °C) in order to allow direct mechanical connections over a range of temperatures. It finds application in electroplated conductors entering glass envelopes of electronic parts such as vacuum tubes (valves), X-ray and microwave tubes and some lightbulbs.

The name Kovar is often used as a general term for Fe–Ni alloys with these particular thermal expansion properties. Note the related particular Fe–Ni alloy Invar which exhibits minimum thermal expansion.

 

OhmAlloy-4J29 also known as Kovar alloy. it was invented to meet the need for a reliable glass-to-metal seal, which is required in electronic devices such as light bulbs, vacuum tubes, cathode ray tubes, and in vacuum systems in chemistry and other scientific research. Most metals cannot seal to glass because their coefficient of thermal expansion is not the same as glass, so as the joint cools after fabrication the stresses due to the differential expansion rates of the glass and metal cause the joint to crack.

 

 

OhmAlloy-4J29was invented to meet the need for a reliable glass-to-metal seal, which is required in electronic devices such as light bulbs, vacuum tubes, cathode ray tubes, and in vacuum systems in chemistry and other scientific research. Most metals cannot seal to glass because their coefficient of thermal expansion is not the same as glass, so as the joint cools after fabrication the stresses due to the differential expansion rates of the glass and metal cause the joint to crack.

 

 

Mainly used in electric vacuum components and emission control, shock tube, igniting tube, glass magnetron, transistors, seal plug, relay, integrated circuits lead, chassis, brackets and other housing sealing.

 

Style of supply

 

Alloys Name Type Dimension  
OhmAlloy-4J29 Wire D= 0.1~8mm  
OhmAlloy-4J29 Strip W= 5~250mm T= 0.1mm
OhmAlloy-4J29 Foil W= 10~100mm T= 0.01~0.1mm
OhmAlloy-4J29 Bar Dia= 8~100mm L= 50~1000mm

Normal composition%

Ni 28.5~29.5 Fe Bal. Co 16.8~17.8 Si ≤0.3
Mo ≤0.2 Cu ≤0.2 Cr ≤0.2 Mn ≤0.5
C ≤0.03 P ≤0.02 S ≤0.02    

 

 

Tensile Strength, MPa

Code of condition Condition Wire Strip
R Soft ≤585 ≤570
1/4I 1/4 Hard 585~725 520~630
1/2I 1/2 Hard 655~795 590~700
3/4I 3/4 Hard 725~860 600~770
I Hard ≥850 ≥700

 

Typical Physical properties

Density (g/cm3) 8.2
Electrical resistivity at 20(mm2/m) 0.48
Temperature factor of resistivity(20~100)X10-5/ 3.7~3.9
Curie point Tc/ 430
Elastic Modulus, E/ Gpa 138

 

 

 

 

 

 

 

 

 

The heat treatment process
Annealing for stress relief Heated to 470~540 and hold 1~2 h. Cold down
annealing In vacuum heated to 750~900
Holding time 14 min~1h.
Cooling rate No more than 10 /min cooled to 200

 

 

Coefficient of expansion

θ/ α1/10-6-1 θ/ α1/10-6-1
20~60 7.8 20~500 6.2
20~100 6.4 20~550 7.1
20~200 5.9 20~600 7.8
20~300<
bigPhoto
 Mr. Mr. Qiu

Tel: 86-21-66796338
Contact to this supplier

Related Search

Alloy Strip    Alloy Steel Precision Casting    Bronze Alloy Strip    Metal Alloy Strip    Wide Width Fabric    Aluminum Extrusion Alloys    More>>

Find more related products in following catalogs on Hisupplier.com

Minerals & Metallurgy >> Metallurgy Machinery

Company Info

Ohmalloy Material Co.,Ltd [China (Mainland)]


Business Type:Manufacturer
City: Shanghai
Province/State: Shanghai
Country/Region: China (Mainland)

View Contact Details

You May Like:

Product (104)